Sun Microsystems Sun Ray Série Guide De L'utilisateur page 25

5. Place the appliance upright on your desk, connect the AC power cable to the
power supply, and plug the other end of the AC power cable into a nearby outlet.
If the appliance displays an image, installation is complete.
Back Panel Cabling of the Sun Ray 150 Enterprise Appliance (optional cables
FIGURE 3
at connectors 2 and 3 are shown for reference)
Note – If the screen image is too large, causing some icons to disappear from view,
you or your system administrator can use the utxconfig command to change the
display mode. See "Troubleshooting" on page en-8 for instructions.
Sun Ray 150 Enterprise Appliance User's Guide en-5