Status Icons - Sun Microsystems Sun Ray Série Guide De L'utilisateur

TABLE 1
Problem
The power indicator
is yellow for more
than 3 seconds.
The power indicator
is blinking green.
You cannot adjust
the appliance with
the buttons on the
front panel.

Status Icons

The icons below indicate the boot status of the appliance.
Icon
Troubleshooting Tips (Continued)
Solution
A hardware fault has occurred. Contact your system administrator
for a replacement unit. See "LED Indicators" on page en-11 for more
information.
The unit is inoperable. Contact your system administrator to correct
the problem. See "LED Indicators" on page en-11 for more
information.
Please contact Sun technical support.
What it means
The unit is starting up.
The server is currently downloading to
the unit 's PROM.
A unit failure has occurred. The unit
tried to download from the server to
the PROM, but failed.
Action to take
Wait. If the unit does not start within a
short time, contact your system
administrator.
Wait. The unit will restart when
downloading is complete.
Contact your system administrator.
Sun Ray 150 Enterprise Appliance User's Guide en-9