Team Orion R8 ONE Mode D'emploi page 13

Start mode "punch"
This parameter sets the initial throttle punch when the car
accelerates. Level1 gives a very soft initial acceleration and
level 9 gives a stronger initial acceleration.
Braking strength
This parameter adjusts the maximum breaking force. A
higher value provides stronger braking, but it can also
cause the wheels to lock causing loss of control of the car.
Stronger brakes make the ESC work harder and run hotter,
overloading the ESC can cause the overheat protection to
activate.
Restore Default Settings
With the throttle in the neutral position, press and hold the
SET button for 5 seconds, the red and green LED will flash
simultaneously indicating that the parameters have been
reset to the factory default values.
TROUBLESHOOTING
In case of malfunction, check the ESC settings and
connections, check that the motor is functional. Make sure
that the batteries are also charged and functional. If you
are unable to solve the issue, stop using the ESC and seek
assistance from your local Team Orion reseller. Do not use
the ESC if the ESC case, connectors or wires are damaged.
Stop using the ESC immediately if it overheats, melts or
emits smoke.
www.teamorion.com 13