Team Orion R8 ONE Mode D'emploi page 12

2) "Forward/Reverse with Brake" this is the basic all-around
mode. In this mode the car can go forward and reverse
and can also brake. When you move the throttle to the
reverse position while the car is moving forward, brakes
are applied until the car is fully stopped, reverse cannot
engage while the car is moving. To engage reverse, once the
car has stopped, release the brakes and move the throttle
to the reverse position again. While braking or in reverse,
if the throttle is moved to the forward position, the car will
immediately accelerate forward.
3) "Forward/Reverse" this mode is meant for "Crawler" cars.
in this mode the ESC goes from forward to reverse and
from reverse to forward without stopping the car, there are
no brakes. Using this function mode with fast or powerful
cars, can cause damage to the car and/or ESC and void the
warranty.
Drag Brake Force
Sets the amount of brake automatically applied when the
throttle is returned to the neutral position. This simulates
the engine breaking effect of a real car; it can help improve
turn-in and the general feeling of the car.
Low Voltage Cut-off
This function helps to prevent battery over-discharge. The
ESC continuously monitors the battery's voltage. If the
voltage becomes lower than the threshold for 2 seconds,
the output power is shut off and the red LED flashes twice
repeatedly.
12 Copyright Team Orion © 2015