Emerson SW93 Mode D'emploi page 7

BP7499 SW93 SW95 SW96.qxp_Layout 1 12/1/14 2:39 PM Page 7
3. Wall Control Installation
3.10
NOTE: The WHITE neutral wires
inside the electrical box must be
connected together for proper
operation of the wall control.
NEVER
neutral wires to the Wall Control.
!
Do not connect any neutral (WHITE)
wire to this control. Incorrect wiring
WILL damage this control.
3.11
Carefully tuck all wires and wire
connectors into the outlet box and
position the Wall Control onto the
outlet box.
3.12
Place the
faceplate onto the Wall Control.
3.13
Assemble the faceplate to the Wall
Control using the two previously
removed 6-32 screws.
connect the WHITE
WARNING
previously removed
(Continued)
DO NOT CONNECT ANY WIRES
FROM WALL CONTROL TO THESE
WHITE NEUTRAL WIRES
POSITION THE
WALL CONTROL
INTO THE
OUTLET BOX
WALL
CONTROL
WIRES TUCKED
INTO OUTLET BOX
PREVIOUSLY REMOVED
6-32 SCREWS (2)
7
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: SW93/SW95/SW96
TO FAN
MOTOR LOAD
TO 120VAC
SOURCE HOT
PREVIOUSLY
REMOVED
FACEPLATE
emersonfans.com