Digital Output; Applications - Focusrite MixMaster Mode D'emploi

DIGITAL OUTPUT

In addition to the analogue outputs, a high quality 16/24 bit 128 times oversampled Digital
Output may be fitted as an option. All of the following functions are available on the rear
panel.
- selectable by the DIGITAL O/P switch. When the switch is
OUTPUT FORMAT
released the output is AES/EBU format on the XLR connector. Pressing the switch in selects
SPDIF format on the RCA phono connector.
RESOLUTION - selects 16 or 24 bit resolution from the converter. When the switch is
released, 24 bit resolution is selected. Pressing the switch in selects 16 bit resolution.
- two switches give a choice of four sample frequencies as
SAMPLE FREQUENCY
marked on the rear panel. The left hand switch selects between 44.1kHz and 48kHz, and the
right hand switch doubles the selected frequency.
EXT WCLK (WORDCLOCK) INPUT
the BNC connector, the MixMaster will attempt to synchronise to it. When the unit is
correctly locked to the external clock source the LOCK LED will light to indicate correct
operation. In this case the LOCK LED should be continuously lit - if it flickers this would
indicate bad jitter on the synchronising signal which would need investigation.
- if an external wordclock source is fed to

APPLICATIONS

Recording/Live
stereo sound module
L & R
out
At Mixdown
input sources
stereo insert
pre or post master fader
returns
sends
stereo bus
U s i n g t h e M i x M a s t e r
line in
console
L & R
in
insert
bus sends
sends
PRO TOOLS
insert returns
to record
hard disk recorder
L & R
L & R
out
in
E
N
G
L
I
S
H
10