Connecting A Usb Data Carrier And Starting Usb Operation; Displaying Time Elapsed Or Remaining; Switching The Display Of Track Information As Scrolling Text On/Off (Scrl); Selecting A Directory - Bosch Dover USB40/80 Mode D'emploi Et De Montage

44 | en
Connecting a USB data carrier and
starting USB operation
In order to be able to connect a USB data
carrier (e.g. a USB stick or a USB drive) the
USB cable must be connected to the mini-USB
socket 8 .
f Connect the USB device to the USB cable.
As soon as a USB data carrier is connected, it
can be selected with the SRC < button. The
display shows "USB".
Displaying time elapsed or remain-
ing
In order to change between display of the
elapsed or remaining time in the current track,
f Press the 6 : button.
Displaying track information (ID3
tags)
If the MP3 data carrier provides ID3 tags, the
information for every track is shown once on
the display as scrolling text at the start of the
track. If no ID3 tags were stored with the MP3
files, the file name is displayed.
Note:
For storing ID3 tags, please also read
the instructions for your PC MP3
software or burner software.
Displaying track information once
as scrolling text
f Press the 5 : button.
The ID3 tags for the current track are shown
once as scrolling text on the display.
7 620 000 120 - 123 | 10.2010
Note:
This function is not available if the
display of track information as
scrolling text is switched off. Please
read the section below: "Switching
the display of track information as
scrolling text on/off (SCRL)"
Switching the display of track infor-
mation as scrolling text on/off
(SCRL)
In order to switch the display of title informa-
tion when a track starts as scrolling text on or
off,
f If necessary, first switch to USB opera-
tion.
f Press the MENU 5 button to open the
menu.
f Press the MENU 5 button repeatedly
until "SCRL" appears on the display, along
with the current setting, "OFF" or "ON".
f Turn the volume controller 1 to the left
or right in order to switch scrolling text on
or off.
f Press the MENU 5 button, repeatedly if
necessary, to close the menu.
If "SCRL OFF" is set, the title information is
shown on the display in segments of 8
characters at a time. Each section of text, along
with the track number and the playing time, are
displayed here for 5 seconds at a time in a
continuous cycle.

Selecting a directory

To move up or down to another directory,
f Press the or
Robert Bosch Car Multimedia GmbH
USB operation
6 button.