Using The Shaver - Braun 7 Serie Instructions D'utilisation

Masquer les pouces Voir aussi pour 7 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
If the station selects one of the required cleaning programs, it will not start unless you
press the start button (4). For best shaving results, we recommend cleaning after
each shave.
Each cleaning program consists of several cycles, where cleaning fluid is flushed
through the shaver head. Depending on your Clean&Renew Station model and/or
program selected, the cleaning time takes up to 16 minutes. Leave the shaver in the
station for drying. It takes several hours until remaining moisture evaporates depending
on the climatic conditions.
When the program is finished, the blue
Stand-by mode
10 minutes after completing the charging or cleaning session, the Clean&Renew station
switches to the stand-by mode: The indicators of the Clean&Renew station turn off.
Shaver display
The shaver display (16) shows the charge status of the battery.
Charging lights (16a)
The green charging lights show the charge status of the batteries. The green charging
light blinks when the shaver is being charged or switched on. When the battery is fully
charged, all green charging lights shine permanently, provided the shaver is connected
to an electrical outlet.
Some minutes after completing the charging, the shaver switches to the stand-by-mode:
The display turns off.
Low-charge light (16b)
The red low-charge light flashes when the battery is running low. The remaining battery
capacity is sufficient for 2 to 3 shaves.
Charging information
• A full charge will take about 1 hour and provides up to 50 minutes of cordless shaving
time. This may vary according to your beard growth and environmental temperature.
5-minute quick charge is sufficient for a shave.
• Recommended ambient temperature for charging is 5 °C to 35 °C. The battery may
not charge properly or at all under extreme low or high temperatures. Recommended
ambient temperature for shaving is 15 °C to 35 °C. Do not expose the shaver to
temperatures higher than 50 °C for extended periods of time.

Using the shaver

How to use
Press the on/off switch (12) to operate the shaver:
• The pivoting shaver head and floating foils automatically adjust to every contour of
your face.
8
indicator will light up.

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7880cc7867cc7865cc7850cc5697

Table des Matières