Midland XT70 Manuel D'utilisation page 53

Baby Sitter function
XT70 is equipped with the "Baby Sitter" function.
Press the MENU button till the display shows "Bs of".
Select with the scroll buttons ▲▼ the baby mode "b" or the sitter (parents)
mode "p".
To confirm, press the PTT button or wait for 5 seconds.
The display will show the selected mode and the icon .
The baby channels "b" (from b1 to b9) have the VOX feature set on the highest
sensitivity (1).
This unit set on one of these baby channels, should be placed near the baby;
while the one used for listening to the baby should be set on the sitter channels
"p" (from s1 to s9).
In the baby channels you can set with the MENU button the VOX sensitivity
level from 1 (highest sensitivity) to 9 (lowest sensitivity). See par. "VOX fun-
ction".
With the MENU button it is also possible to change the baby or sitter channel
and select the high (H) or low (L) power.
In order to have the baby-sitter function properly operating, the 2 radios must
be set on the same frequency band (same channel and same CTCSS tone).
For example: if the radio place near the baby is set on the channel b1, the other one
used for listening to the baby should be set on channel s1.
To momentarily display the PMR446 channel and the sub-audio tone of the
Baby sitter channel, go to the desired channel and keep pressed the ▲▼ but-
tons for 5 seconds.
14 | XT70 user's manual