Before Use - Rowenta Pro Precision Mode D'emploi

DESCRIPTION OF PRODUCT DI GR M
1. Iron handle
2. Steam trigger
3. Temperature control dial for iron
soleplate
4. Iron rest
5. Water tank cover
6. Water tank
7. Boiler (inside)
8. Scale collector cover
9. Power cord
10. Power cord storage (velcro)
Due to the powerful steam output, a mesh top ironing board (vs. a perforated top
ironing board) must be used to allow any excess steam to escape and to avoid steam
venting sideways.

BEFORE USE

Please read all of the instructions for
use and the Important Safeguards
carefully.Remove all packaging from
the product. It is normal for a small
amount of smoke and a light odor to
be produced the first time it is
used.This will quickly disappear.
1 • Water recommendations
Tap water
Rowenta irons are designed to be used
with REGUL R T P W TER (up to 12
grains per gallon of hardness – contact
your local water company). If your water
is harder than
recommends mixing half tap water with
half distilled water which reduces the
hardness; or just use inexpensive bottled
spring water.
Softened water
There are many types of household
water softeners and the water from many
of them is perfectly acceptable for use in
the Pro Precision
However, some types of softeners,
particularly those that use chemicals
such as salt, can cause the appliance to
leak or spit during use. If you experience
this type of problem, we recommend that
you try using inexpensive bottled spring
this, Rowenta
steam station.
4
11. Iron temperature control light
12. Iron positioning shoulder
13. Steam cord
14. Steam cord storage clip
15. Calc scale collector
16. Control panel
a. "Restart" button
b. "Calc away system" light
c. "Steam ready" light
d. "Water tank empty" light
water or untreated tap water.
Once you have changed water it will take
several uses to correct the problem.
Rowenta recommends trying the steam
function for the first time on an old towel
or cloth that can be discarded to avoid
potentially damaging your clothes.
lways remember :
Water containing additives (such as
starch, perfume or fabric conditioner)
will not be used. Such additives can
affect the properties of the steam and at
high temperatures can form deposits in
the steam chamber which may mark the
laundry when they are emitted through
the steam vents.
Descaling liquids/agents should not be
used.
2 • Filling the Pro Precision
steam station
The Pro Precision steam station is
designed to operate using tap water.
While unplugged, place the Pro Precision
steam station on a stable, heat resistant
surface.
Open the water tank cover. Fill the tank
with a maximum of 33oz./1L of water,
taking care not to overfill
the water tank cover. Completely unwind
the power cord and remove the steam
cord from its housing.
(fig. 1). Close
(fig. 2)
EN