Rowenta Pro Precision Mode D'emploi page 10

Operation:
n orange "Calc- way System" light
located on the control panel starts
flashing to tell you that the scale collector
needs rinsing fig.11.
IMPORT NT! This operation must not
be carried out unless the Pro Precision
steam station has been unplugged for
at least two hours and has cooled
down completely.
To carry out this operation, the product
must be close to a sink as water may
come out of the tank when it is opened.
Once the Pro Precision steam station has
cooled completely, remove the scale
collector cover by giving a ¼ turn to the
left - fig.12.
Unscrew the scale collector valve and
remove it from the housing; it contains
the scale (i.e. calc or calcium) that has
built up in the boiler - fig.13.
To clean the collector properly, just rinse
it under running water to remove the
scale it contains - fig.14.
Put the collector back into its housing
and screw it in completely to keep it
watertight - fig.15.
Put the scale collector cover back on with
a 1/4 turn to the right -
The next time you use your Pro
Precision steam station, press the
"Restart" button on the control panel to
turn off the orange "Calc- way
System" light - fig.10.
Environment protection first !
i Your appliance contains valuable
materials which can be recovered or
recycled.
‹
Leave it at a civic waste disposal
center or call your local
municipality to learn where to
properly dispose of the product.
fig.16.
7