Storage; Troubleshooting; Technical Data; Disposal - Profi Cook PC-SM 1103 Mode D'emploi

WARNING:
• The blades on the knife block are very sharp. A risk of injury
exists!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The individual parts are not dishwasher-safe.
NOTE: Preliminary Cleaning
Fill the mixing vessel halfway with water. Operate the
appliance for approx. 10 seconds.
For thorough cleaning, please remove the mixing
vessel.
Mixing Jar, Lid and Measuring Cup
Clean these parts in a bowl of hot water. Then dry
everything before assembling the parts again.
Housing
Only a moderately moist cloth should be used for
cleaning the outside of the device.

Storage

• Clean the device as described. Let the accessories
dry completely.
• We recommend that you store the device in its orig-
inal packaging when it is not to be used for a longer
period.
• Always store the device at a well ventilated and dry
place outside the reach of children.

Troubleshooting

Problem Possible Cause Solution
Device is No power supply Check the mains
not working.
Wrong setting of
the rotary control.
The overheating
protection has
been activated.
The motor is too
hot.
PC-SM1103_IM
Model: ....................................................... PC-SM 1103
Power supply: ............................ 220 - 240 V~ 50 / 60 Hz
Power rating: .....................................................2000 W
Protection class: ..........................................................
Capacity: ........................................................max. 2,0 l
Net weight: ........................................... approx. 4,65 kg
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
This device has been tested according to all relevant
current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Meaning of the "Dustbin" Symbol
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
connection.
You can continue
operation only after
setting the rotary
control to "OFF".
1. Pull the power
plug.
2. Let the appli-
ance cool down
for approx. 10 to
15 minutes.

Technical Data

Disposal

Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment
that you will no longer use to the collection
points provided for their disposal.
08.01.16
39