PowerSmith PGA2200i Manuel D'utilisation page 22

TRANSPORTING/STORAGE
Transportation handle (FIG 20)
When carrying the generator set for a short distance, the transportation handle and transportation wheel could be used
for easy transport.
1.
Pull out the unfolded ring, and unfold the transportation handle until a CLICK sound.
2.
Pull out the folded ring, and fold the transportation handle to the original position after transporting.
Storage
Before storing the unit for an extended period:
Be sure the storage area is free of excessive humidity and dust.
Drain out the fuel completely.
Remove the maintenance cover and change the engine oil.
Remove the spark plug and pour about a tablespoon of clean engine oil into the cylinder. Crank the engine several
revolutions to distribute the oil and then reinstall the spark plug.
Reinstall the spark plug cap on the spark plug securely.
Reinstall the maintenance cover.
Slowly pull the recoil starter until resistance is felt, then return the recoil starter gently. At this point, the piston is
coming up on its compression stroke and both the intake and exhaust valves are closed. Storing the engine in this
position will help to protect it from internal corrosion.
WARNING:
Gasoline and fuel vapors is extremely flammable and is explosive. Stop the engine and keep
heat, sparks and flame away. Wipe up fuel spills immediately. Handle fuel in a well-ventilated area with the engine
stopped. Do not smoke or allow flames or sparks in the area where gasoline is stored.
English
22
FIG 20