Maintenance; Maintenance Schedule - PowerSmith PGA2200i Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Good maintenance is essential for safe, economical and trouble-free operation. It will also help reduce air pollution. The
purpose of the maintenance and adjustment schedule is to keep the generator in the best operating condition.
WARNING:
Read and understand the Important Safety Rules before starting the generator.
DANGER:
Shut off the engine before performing any maintenance. If the engine must be run, make sure
the area is well ventilated. The exhaust contains poisonous carbon monoxide gas.
WARNING:
When servicing, use only recommended or equivalent replacement parts. Use of any other
parts could create a hazard or cause product damage.
WARNING:
Allow hot components to cool to the touch prior to performing any maintenance procedure.
WARNING:
Internal pressure can build in the engine crankcase while the engine is running. Removing the
oil fill plug/ dipstick while the engine is hot can cause extremely hot oil to spray out of the crankcase and can severely
burn skin. Allow engine oil to cool for several minutes before removing the oil fill plug/dipstick.
WARNING:
Avoid skin contact with engine oil or gasoline. Prolonged skin contact with engine oil or gaso-
line can be harmful. Frequent and prolonged contact with engine oil may cause skin cancer. Take protective measures and
wear protective clothing and equipment. Wash all exposed skin with soap and water.
WARNING:
Failure to perform periodic maintenance or not following maintenance procedures can cause
the inverter to malfunction and could result in death or serious injury.

MAINTENANCE SCHEDULE

(1)
REGULAR SERVICE PERIOD
Perform at every indicated
month or operating hour inter-
val, whichever occurs first.
ITEM
Visual inspec-
tion (condition,
Complete
wear, leaks)
machine
Clean
Check
Engine oil
Change
Check
Air filter
Clean
Check
Spark plug
Change
Fuel filter
Change
Carburettor
Check and clean
Valve
Check and
clearance
adjustment
(1) Log hours of operation to determine proper maintenance.
(2) The first changing of the engine oil shall be done on the first month or 10 hours, whichever is the earlier.
(3) Service more frequently when used in dusty areas.
(4) These items should be serviced by an authorized dealer unless the owner has the proper tools and is mechanically proficient.
English

MAINTENANCE

Before
Every 10
Every 4
each use
hours
months or
50 hours
*
*
(2)
*
*
18
Every year
Every two
or 150
years or
hours
300 hours
*
*
(3)
*
*
*
*
(4)
(4)
*
*
(4)

Publicité

Table des Matières
loading

Table des Matières