Throttle Valve Handle Clearance Adjustment; Tire Inspection - SIM MIO FS11W1-EU Série Manuel D'utilisation

THROTTLE VALVE HANDLE CLEARANCE ADJUSTMENT

 Correct clearance allows throttle vale handle to
5~10°
rotate .
 Loosen the lock nut first, then turn the adjust nut
to adjust. Tighten the lock nut securely when
finished.
Check Items:
1. Check throttle valve cable to see if it can be
moved smoothly from a closed position to a
wide open position.
2. Rotate steering handle from side to side to
check if the throttle valve cable is interfered.
3. Check to see if the throttle valve cable is
obstructed by other cables preventing it from
being operated smoothly.

TIRE INSPECTION

 Tires should be checked and inflated with the engine shut off.
 If a tire's ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to the
specified pressure.
 Tires pressure must be checked with an air pressure gauge when cold.
PLEASE REFER TO SPECIFICATIONS FOR STANDARD TIRE PRESSURE
Foreign materials
(Nails or small stones)
CAUTION：
Abnormal tire pressure, wear, or crack is the most important cause that results in the loss control of
the steering handle and a punctured tire(s).
Crack and damage
Tread wear indicator
8. Inspection and maintenance before riding
 Visual check tires for frontal and lateral side walls
for crack or damage.
 Visual check tires for any nails or small stones
wedged in the tread.
 Check the "tread wear indicator" condition to see if
tread groove depth is insufficient.
 A tire with a wear bar showing is worn out and
should be replaced immediately.
19
5~10°