8.
INSPECTION AND MAINTENANCE BEFORE RIDING
ROUTINE INSPECTION
Check Items
Engine Oil
Fuel
Front
Brake
Rear
Front
Tires
Rear
Steering Handle
Speedometer, lights, and
rearview mirror
Tightness of Main Components Are screws, nuts loosen?
Abnormal Points
CAUTION:
If any problem founded during routine inspection, correct the problem before using the scooter again,
have your scooter checked and repaired by the "SYM dealer or authorized service personnel" if
necessary.
FUEL INSPECTION
Turn ignition switch key to "ON" position, and check fuel gauge's needle range to make sure there is
enough amount of fuel in the fuel tank.
This scooter's engine is designed for using the unleaded fuel of octane 92 or above.
Firmly secure the main stand on the ground, shut off the engine and keep flames away from the
scooter when refueling.
Do not fill above fuel upper limit level when refueling.
Make sure the fuel tank cap had been tighten properly.
Is there enough engine oil?
Is it enough? Is it Octane 90 or above
Braking condition?
(Drum type brake lever free play: 10~20mm)
Braking condition?
(Drum type brake lever free play: 10~20mm)
Is tire pressure normal?
(Standard: 1.5kgf/cm
2
Is tire pressure normal?
(Standard: 2.3kgf/cm
2
Does the handle vibrate abnormally or is difficult to turn?
Is it operated properly?
Do lights come on? Can it be seen clearly from behind?
Do the previous troubles still exist?
8. Inspection and maintenance before riding
Check Key Points
)
)
15