Fein WSG20-180 Manuel D'utilisation page 25

Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the
last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out power tools and accessories
should be sorted for environmental-friendly recycling.
Selection of accessories
(see pages 12 – 13).
Use only original FEIN accessories. The accessories
must be intended for the power tool type.
A Grinding disc, flap disc
(use only with mounted wheel guard)
B Steel wire brush
(use only with mounted wheel guard)
C Backing pad for fibre sanding sheets, fibre sanding
sheets
(mount only with the provided backing-pad clamp-
ing unit; use only with mounted hand guard or wheel
guard)
D Backing pad with Velcro, Velcro sanding sheets,
sanding fleece with Velcro attachment
(use only with mounted hand guard)
E Steel cup brush, round twist brushes
(use only with mounted hand guard)
F Cutting disc
(use only with mounted cut-off wheel guard)
en
25