LSL 100 Serie Notice De Montage page 8

Fitting the steering damper
Fitting the body clamp
Fitting the damper rod
————————————————
Date: 25.01.2007
Accessories from
4. Fit the body clamp (B) first with
screw M8x30, stainless
chamfered bush (E) and O-Ring
(F) on the top yoke bracket (D) as
shown.
5. Then mount the damper rod with
screw M8x35 and bush (G) on the
frame bracket (C) as shown.
Please make sure that the
steering damper is not used as
a steering stop! Check all
screw connections at last and
start with lowest damping for
first ride!
The Original
— ——
Page 4 of 4