Accessories Installation - Astralpool PRO ELYO TOUCH PET-08 Manuel D'installation Et D'utilisation

4.3 Accessories Installation

4. 4. 4. Accessories Accessories Accessories
- 73 -
and and and options options options
Anti-vibration bases
1. Take out 4 Anti-vibration bases
2. Install them on the bottom of
machine.
Draining plug
1. Install the draining plug under the
bottom panel
2. Connect with a water pipe to
drain out the water.
Note: Lift the heat pump to install
the draining plug. Never overturn
the heat pump, it could damage the
compressor.
Water Inlet & outlet connection
1. Install the two joints like the
picture shows
2. Screw them onto the water Inlet
& outlet connection
Mains Cable wiring
1. Open the cover of the terminal
box (marked red) on the side of
machine
2. Tight the cables in the correct
connections, L N E, inside the
terminal block.
Filtration pump wiring (Dry contact)
1. Open the cover of the terminal
box (marked red) on the side of
machine
2. Tight the cables in the correct
connections, 1 2, inside the terminal
block.