Front Vehicle Go - Snooper DVR-4HD Guide De L'utilisateur

Note:
1. FCWS is only applicable when satellite positioning is in ready state. Make sure satellite positioning of your
device is ready if you want to activate this function. Satellite positioning function is dependent on the model
purchased.
2. The Driving Safety functions such as LDWS, FCWS, Front Vehicle Go, Headlight warning, Speed Cam Alert,
Speed Limit Alert, Driver Fatigue Alert and ACC/DEC Alert will be disabled, if the product doesn't connect with
the external power supply.
3. The FCWS function may give false alarms in poor conditions, including rainy or cloudy weather, at night, or
in poor lighting environments. Drivers are advised to exercise discretion based on actual road conditions.

3.2.3 Front Vehicle Go

Once your car's location is determined by GPS and the Front Vehicle Go function is enabled, this product
starts to detect the motion of cars in front of you after your car remains motionless for 20 seconds. It
produces voice and screen message alerts when the movement of the car in front of you changes its images
in the camera.
To set the front vehicle go, do the following:
1. Touch to enter Main Menu.
2. Touch to switchover to Driving Safety Main
Menu.
3. Touch / to select
Vehicle Go function menu, then touch
enable the function (on).
4. Touch to return to record screen.
5. After enabling Front Vehicle Go, the screen will display align icon
so that the horizontal line and the eye level are overlapped and the slash lines are centered in the
driving lane. Make sure that align icon will not be obscured (e.g. hood) during installation, it may cause
misjudgement if the endpoint is obscured.
for entering Front
again to
EN • 21
, please adjust the camcorder
Eye Level
DVR 4HD 2015 V1.1 12/4 MultiLing
Vanishing Point
Horizon
© copyright 2015