Connecting To Power; Battery Status Indicator - Snooper DVR-4HD Guide De L'utilisateur

2.3 Connecting to Power

Use only the attached power connector for activating the device and
charging the built-in battery.
1. Connect one end of power connector to USB/Power connector
port on the device.
2. Plug the other end of the car adapter to the cigarette
lighter socket of your vehicle. Once the vehicle engine
is started, the device automatically turns on.
Note:
1. This product shall be installed near the rear view mirror, at the center and top of windshield for optimal
viewing.
2. This product contains functions such as LDWS (Lane Departure Warning Systems) (3.2.1)
FCWS (Forward Collision Warning System) (3.2.2) and Front Vehicle Go (3.2.3). Please refer to the alignment
measures given in the individual sections during their installation for improved accuracy.
3. Please connect your product to an external power source for operation, otherwise its LCD touch screen
may fail to operate properly. Battery Status Indicator:

Battery Status Indicator:

Icon
Note:
Please take note if the environment temperature reaches 45°C or above, the car adapter still can supply
power to device, but it will not charge the Lithium-ion battery. This is the characteristic of Lithium-ion and is
not a malfunction.
Description
Full battery power.
2/3 battery power.
1/3 battery power.
Out of battery power.
Battery is charging.
Connect the car adapter to charge the battery, battery is full charged.
EN • 10
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015