Snooper DVR-4HD Guide De L'utilisateur page 15

3. Touch / to select
function menu; wait for screen to display device ID
and Wi-Fi password.
Note:
Wi-Fi function is dependent on the model purchased.
4. Using Wi-Fi function of a mobile device, search for device ID from the list and select and enter Wi-Fi
Password.
For iOS / Android Users:
Using the mobile device [Settings] → [Wi-Fi] → [Select device ID no.: DVR4HDXXXXXX]→ [Enter the
password] → [Connecting]
5. Execute the Drive CAM
To disconnect Wi-Fi link, just exit Drive CAM
6.
Note:
1. Make sure the Wi-Fi function of the equipment is activated and the mobile device is receiving Wi-Fi signal
before executing the Drive CAM App, or the App will be exited.
2. The mobile device shall be within a maximum of a 10m distance from the equipment without any buildings
in between.
3. When the Wi-Fi function of the equipment is activated for 3 minutes without connecting with your mobile
device, or the connection is disconnected, the equipment will automatically stop the Wi-Fi function and you
will need to re-activate the Wi-Fi function.
4. We suggest that you should set the correct date and time for your mobile device before using the
equipment, so that the recorded video will be consistent with the date and time settings of the mobile device.
5. When linking up with a mobile device, touch-control of device screen is no longer effective. Perform
operations via the Drive CAM Application. For operating the device again, you need to exit the Drive CAM
Application first. To operate the device, please quit the Drive CAM program, and restart.
6. The language of the Drive CAM App will be consistent with that of your mobile device, it shall be the default
language if it is not the built-in one.
for entering Wi-Fi
Device
Wi-Fi Password
App.
EN • 14
Application.
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015