Adjust The Device Position - Snooper DVR-4HD Guide De L'utilisateur

2. With the suction-cup laying flat, position the suction-cup on
the windshield.
3. Hold the base firmly on the windshield and press down the
clamp to mount the car holder to the windshield. Make sure
the base is securely locked in place.

2.2.2 Adjust the device position

1. Loose the knob to swivel the device vertically.
2. Loose the knob to swivel the device horizontally up to
360°.
3. Then tighten the knob to make sure the device is
securely locked in place.
1
EN • 9
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015
2