Fein Slugger JMU 137 QW Serie Mode D'emploi page 24

OBJ_BUCH-0000000355-002.book Page 24 Tuesday, March 12, 2019 4:36 PM
en
24
Activating and deactivating the cool-
ant-lubricant flow (figure 15).
To activate the cooling-lubricant flow,
open the ventilation first and then turn
the flow valve to the position shown.
For switching off or when working
overhead, deactivate the cooling-lubri-
cant flow. Shut the ventilation and turn
the flow valve to the position shown.
When working overhead, use a cooling-lubri-
cant paste from Slugger.
Fig. 15
1.
Ventilation
2.