Adjusting The Idle Speed - Craftsman GR 1597 Manuel De L'utilisateur

Slots
Air Filter Cover

ADJUSTING THE IDLE SPEED

WARNING:
protective clothing and observe all safety instructions to prevent serious personal injury.
If the engine will not idle properly:
1. Start the engine. Refer to Starting and Stopping.
2. Release the throttle control and let the engine idle.
• If the engine stops, increase the idle speed. Use a small Phillips screwdriver to turn the idle
speed screw clockwise, 1/8 of a turn at a time, until the engine idles smoothly (Fig. 21).
• If the cutting head spins when the engine idles, reduce the idle speed. Turn the idle speed
screw counterclockwise, 1/8 of a turn at a time, until the cutting head stops moving (Fig. 21).
The cutting head may spin during idle speed adjustments. Wear
Idle Speed Screw
Hooks
Fig. 20
Fig. 21
29
Cover Screw Hole
Air Filter Housing