Craftsman GR 1597 Manuel De L'utilisateur page 14

Cutting Head Shield
INSTALLING AND REMOVING THE ATTACHMENT
The coupler enables the use of various optional attachments.
WARNING:
with the attachment. Follow all safety information contained within.
WARNING:
before removing or installing an attachment.
Installing the Attachment
1. Remove the hanger cap from the attachment. Keep the hanger cap for use when storing the
attachment. If present, remove the gray spacer from the coupler.
2. Set the unit on a flat, level surface.
3. Turn the knob counterclockwise to loosen the coupler (Fig. 5).
4. Align the release button with the guide recess (Fig. 7).
Hole
Bolt
Bolt
Before using any attachment, read and understand the manual that came
To avoid serious personal injury and damage to the unit, shut the unit off
Fig. 3
Fig. 4
14
Mount Bracket
Tab
Slot
Wing Nut
Washer