Operation - Craftsman GR 1597 Manuel De L'utilisateur

STOPPING INSTRUCTIONS
1. Release the throttle control and allow the engine to idle.
2. Press and hold the On/Off switch in the Off (O) position until the engine comes to a complete stop
(Fig. 10).
HOLDING THE UNIT
WARNING:
risk of injury when operating this unit.
WARNING:
while operating the unit. The engine may be extremely hot.
• Stand in the operating position (Fig. 14). Stand up straight. Do not bend over.
• Keep feet apart and firmly planted.
• Hold the shaft grip with the right hand. Keep the right arm slightly bent.
• Hold the handle with the left hand. Keep the left arm straight.
• Hold the unit at waist level.
• Position the cutting head a few inches above the ground.

OPERATION

Always wear eye, hearing, hand, foot and body protection to reduce the
To prevent serious personal injury, avoid arm contact with the engine
Fig. 13
23
Electric Start Port