Instructions For Installation And Service; General Instructions; Power Requirements; Handling And Installation - Statice Tempering Magic Temper ALPHA Manuel Technique

2. Instructions for installation and service

2.1. General instructions

•
Warranty of the Magic Temper® is only valid for a "standard" use such as described in this
manual.
•
Warranty does not apply if device has been dismantled, even partially.
•
Only people authorized by STATICE TEMPERING could open and access to the inside of the
device.
•
Disconnect the power supply before any intervention on the device (cleaning, repairing, etc.).
•
This user manual is part of the device, please keep it during its whole lifecycle and pass it on
to further users/owners.

2.2. Power requirements

•
The external power supply is connected via a power cable to the main plug.
•
There is an « on/off » switch at the front of the device.
•
Only the plug off of the power supply guarantees that all elements are no longer under
electrical supply.

2.3. Handling and installation

•
The device weights approximatively 2kg.
•
It must be placed on a flat and stable surface.
20