OPERATION INSTRUCTION
W A R N I N G
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will only fit into a polarized outlet one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way. This unit has a polarized plug (one blade is wider than the other) and will
require the use of a polarized extension cord. This unit plug will only fit into a polarized extension cord
one way. If the plug does not fully fit into the extension cord, reverse the plug. If the plug still does
not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a
polarized wall outlet. This plug will only fit into a polarized wall outlet one way. If the plug does not fit
fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to
install the proper wall outlet. Do not change the unit plug, extension cord receptacle, or extension cord
plug in any way.
STARTING/STOPPING THE BLOWER / VACUUM
(See Figure 8.)
This unit is equipped with a three-way (OFF/ LOW/ HIGH) switch.
• Slide the switch forward for ON.
• Slide the switch forward to the first position for LOW speeds up to 160 MPH (257 km/h).
• Slide the switch forward to the second position for HIGH speeds up to 230 MPH (402 km/h).
Once the unit is plugged in, stand in the operating position. Slide the power/speed switch to LOW or
HIGH to start the unit. To stop the unit, slide the switch to OFF.
Speed 2
Switch
Speed 1
OFF
Figure 8.
14