GreenWorks BLV12B00 Manuel Du Propriétaire page 10

ASSEMBLY INSTRUCTION
W A R N I N G
To prevent serious personal injury, make sure the unit is in the OFF position, unplugged, and the
impellers have stopped before attaching or removing tubes.
ASSEMBLE AS A VACUUM
(See Figure 2-5.)
1. Slide the front tube and rear tube together until the lock button engages.
Front Tube Rear Tube
Figure 2.
2. Slide the locking spring and pull lock button forward to disengage the gate. Hold the gate open.
3. Insert the "wedged" end of the vacuum tube into the rear clip.
"Rear clip"
"Wedged"
Gate
Lock Spring
Figure 3.
10