2.8. TURNING ON THE DEVICE
a.- Place the plate on top of the griddle, making
the plate lugs coincide with the holes in the
griddle supports.
b.- Open the gas passage of the general supply
network.
2.- Ignition.
- Press and turn the knob to the position of two flames.
- Lift or remove the fat collector.
- Press the electric piezo repeatedly until the burner ignites..
- Press and hold the knob for 10 seconds, to allow time for the safety valve to act.
- Relocate the fat collector to its initial position.
- Regulate the flame of the burner to the desired power, the thermostatic valves are
numbered from 1 to 8, with 1 being the minimum power and 8 the maximum.
3.- Switching off: To switch off the appliance, simply turn the knob to the OFF position (0).
4.- It is recommended to close the gas passage of the general supply network.
3. INSTRUCTIONS FOR USE AND MAINTENANCE FOR THE
USER
3.1. PRELIMINARY PRECAUTIONS
- This device is for professional use only and must be used by qualified personnel.
- To perform maintenance, cleaning or repairs, the gas cock must be closed.
Periodic checks will be carried out, in accordance with the regulations in force in the
country in which the device is to be installed.
The manufacturer is not responsible for the damages caused by the use of the machine
with any modification, elimination or lack of maintenance of its components carried out
without prior and express authorization of the manufacturer.
This is a device that has very hot surfaces in particular the breastplate and contact
should be avoided without the use of gloves.
3.2. TURNING THE DEVICE ON AND OFF
See section 2.8 point 2.- Ignition
19