Fronius PullMig Instructions De Service page 17

General
Introduction Thank you for the trust you have placed in our company and congratulations on buying this
high-quality Fronius product. These instructions will help you familiarise yourself with the
product. Reading the instructions carefully will enable you to learn about the many different
features it has to offer. This will allow you to make full use of its advantages.
Please also note the safety rules to ensure greater safety when using the product. Careful
handling of the product will repay you with years of safe and reliable operation. These are
essential prerequisites for excellent results.
Device concept PullMig is a wire feed unit for manual welding using soft welding wires and with long hose
packs. Two toothed precision rolls ensure large-surface power transmission. This leads to
outstanding wire feed even with very soft aluminium and CuSi wires and very long hose
packs. The many different versions of PullMig available are one of its distinguishing fea-
tures.
Thus there are several variations of torch connections available with both external and in-
ternal coolant connections. A variety of pipe bend designs ensures excellent weld acces-
sibility.
Proper use The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in manual ap-
plications.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
► All the work and functions described in this document must only be carried out by
► Read and understand this document.
► Read and understand all the Operating Instructions for the system components, espe-
Danger from electric current and risk of injury from the emerging wire electrode.
This can result in serious injury and damage to property.
► Turn the power source mains switch to the "O" position.
► Disconnect the power source from the mains.
► Ensure that the power source remains disconnected from the mains until all work has
Carefully reading and following all the instructions given in the operating instructions
Performing all stipulated inspection and maintenance work.
WARNING!
trained and qualified personnel.
cially the safety rules.
WARNING!
been completed.
17