Leak Tests - IKEA GRILLSKAR Notice D'utilisation

When storing the barbecue or gas cylinder,
ensure they are away from flammable
materials or liquids.
The gas cylinder must not be stored next to
this or any other appliance.
Always follow care and maintenance
instructions – regularly maintain your
barbecue.
Do not allow grease, fat or food residue to
build up in or on the barbecue – RISK OF FIRE.
Always replace worn parts – do not use the
barbecue if a leak, wear or damage is found.
Never overload the grill with food – evenly
space over the cooking grill surface, ensuring
sufficient air circulation to the burners.
Do not store or cover the barbecue until fully
cooled.
This product is not suitable for lava rocks.
Do not obstruct the flow of combustion and
ventilation air.
Keep the ventilation opening of the cylinder
enclosure free and clear from debris.
This appliance must be kept away from
flammable materials during use.
Pressure regulator and hose assembly
supplied with this barbecue must be used,
propane regulator which complies to EN16129
and LPG hose compliant EN16436-1 no longer
than 1.5m in length.
Replacement pressure regulators and hose
assemblies must be the same as those
supplied originally with the barbecue.
Never use an adjustable regulator with this
barbecue.
Do not hang any combustible materials from
the hand rails of this barbecue.
Accessible parts may be very hot. Keep young
children away.
Always wear protective gloves or a barbecue
mitt when handling hot components or items
such as pots.
Before each use inspect the gas hose to
ensure it is free of any twisting or tension.
Note: The flexible LPG hose must be replaced
prior to the expiry date as specified by the
hose manufacturer.

LEAK TESTS

IMPORTANT – PERFORM LEAK TESTS BEFORE USE
Always leak test the unit – annually, when
dismantled, when parts are replaced, or if the gas
cylinder is removed or replaced.
• Never use an open flame to check for leaks at
any time. DO NOT IGNITE THE BARBECUE
DURING LEAK TESTING.
• To be performed in a well-ventilated area.
• Be sure all control knobs are in the 'OFF'
position.
• Check for leaks by brushing a solution of 1/2
water and 1/2 soap over all the gas system joints,
including all valve connections, hose connections
and regulator connections.
• Ensure the soap solution has been applied to all
connections – connect the regulator to the gas
cylinder, open the gas control valve on the
regulator allowing gas to flow.
• OBSERVE – if bubbles form over any part of the
joints there is a leak.
• Turn off the gas and tighten all joints
• Repeat test. If bubbles form again, do not use
the barbecue. Please contact your local dealer
for assistance.
GAS AND REGULATOR INSTRUCTIONS
• The cylinder should be positioned underneath
the main barbecue body and stored upright.
• Gas cylinders should never be stored or laid on
their side.
User instructions
Before assembling your barbecue, remove all
protective packaging from each part.
The gas cylinder must have a connection
compatible with the regulator supplied with the
barbecue and have a minimum capacity of 4kg /
9lbs, with a maximum dimensions of 32cmx58cm.
See assembly instructions for cylinder position.
Do not store a spare LP gas cylinder under or near
this appliance.
Never fill the cylinder beyond 80% full.
Failure to follow these instructions exactly may
result in fire causing serious injury or death.
Place dust cap on cylinder valve outlet whenever
the cylinder is not in use. Only install the type
of dust cap on the cylinder valve outlet that is
provided with the cylinder valve. Other types of
caps or plugs may result in leakage of propane.
35