Product Features; How To Use; Instructions For Charging - Remington WDF-3500 Guide D'utilisation Et D'entretien

Product Features

Shaver Parts
(A) Trimmers (two trimmers on
WDF-6000 & WDF-7000 only;
one front trimmer on
WDF-3500/5500)
(B) Foils
(C) Head release button
(D) Low-battery indicator (Red light,
only on WDF-6000 & WDF-7000)
(E) Charging indicator (Green light)
(F) ON/OFF button
(G) Power port
(H) Head guard
(I) Cleaning brush
(J) Power adapter
(H)
(I)
4
32638_WDF-3500_5500_6000_7000_IB.indd 4-5
(A)
(B)
(E)
(D)
(F)
(G)
(J)
(for WDF-3500/5500/6000
models only, WDF-7000's
plug goes directly into
shaver)
Please refer to your Safety Instructions
before operating your shaver.

Instructions for Charging

Before charging shaver, wipe off any
moisture from the shaver and charg-
ing stand. Do not place shaver into
charging stand (exclud-
ing Model WDF-7000)
(C)
while shaver or hands
are wet. Always charge
shaver in a cool, dry
place.
■ To charge your
shaver, connect the cord from the
charging stand to your electrical
outlet.
■ Be sure shaver is OFF before
placing on the charging stand. The
green indicator light on the shaver
indicates your shaver is charging.
■ Charge shaver for 18–24 hours
before using it for the first time
and thereafter as
required. Shaver cannot
be overcharged so
you may leave it on
the charging stand
between shaves, or you
may remove it for a
week or more before recharging.
■ To avoid damaging the foils, do not
push on the foils when inserting
the shaver into the charging stand.
■ In order to preserve the life of
the batteries, they should be fully
discharged every six months and
then fully charged for 24 hours.

How to Use

■ WDF-3500/5500/6000/7000
Charger: 105-130V., 60Hz; 105-
240V., 50Hz
■ NOTE: The WDF-6000/7000 is
designed with a second LED, a
red low- battery indicator that will
illuminate when there is 5 minutes
of shave time remaining while
shaver is running.
Instructions for Use
Your new Smooth & Silky
designed with two flexing foils and
floating trimmers (one on WDF-
3500/5500, two on WDF-6000/7000)
in order to attain the closest, most
comfortable shave. It can be used
wet with foam or soap lather, or it
can be used dry.
■ Remove headguard before shaving.
■ Press the on/off button to turn unit on.
■ For best results, move the shaver
back and forth across skin, making
sure that the foils and trimmers are
always gliding against
your skin at the same
time.
■ After shaving, press
the on/off button
again to turn shaver
off.
A shaving appliance
is a washable
shaver, the
hand-held part
of which may be
cleaned under
water.
Ultra is
®
5
2/22/07 12:56:49 PM