KTM 54801043012 Notice De Montage page 3

Remove the headlight mask.
1
Remove the handlebar clamp, tilt the handlebar down towards the front.
Remove the handlebar support.
Screw on the handlebar heightening piece 1 in the desired position.
Screw on the handlebar support 2, apply Loctite 243 to the screws and
tighten to a torque of 40 Nm.
Mount the handlebar and the handlebar clamp, apply Loctite 243 to the
screws and tighten to a torque of 20 Nm.
Mount the headlight mask.
2
Scope of supply:
1 set
2 pcs
or:
1 set
2 pcs
T
HE HANDLEBAR HEIGHTENING PIECES CANNOT BE COMBINED WITH EACH OTHER
54801043012 12 mm handlebar heightening piece
0912.100406 AH screw DIN 6912 M10x40 10.9
54801043020 20 mm handlebar heightening piece
0912.100456 AH screw DIN 6912 M10x45 10.9
WARNING
3
.