Horizon Fitness EX-59 Manuel Du Propriétaire page 11

ASSEMBLY STEP 6
LOWER LINK ARM
TEFLON WASHERS (S)
Open hardware bag 6.
A
Align end of lower link arm with bracket on
B
bottom of lower handlebar.
Place teflon washers (s) on both sides of
C
the lower link arm. While holding teflon
washers (s) slide lower link arm into
NUT (V)
bottom end of lower handlebar.
LOWER HANDLEBAR
FLAT WASHER (T)
Secure the joint with 1 flat washer (t), 1
D
SPRING WASHER (B)
spring washer (b),1 bolt (u) and secure
with 1 nut (v).
BOLT (U)
Repeat steps B–D on the opposite side of the
E
elliptical.
HARDWARE BAG 6 CONTENTS :
TEFLON
FLAT WASHER (T)
WASHER (S)
17 mm
28.4 mm
Qty: 2
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 2
BOLT (U) NUT (V)
70 mm Qty: 2
Qty: 2
11