Knick Protos 3400 X Serie Mode D'emploi page 19

Protos 3400(X) Modular Concept
Basic unit, measuring and communication modules, additional functions
The Protos 3400(X) is an expandable modular process analysis system.
The basic unit (Front and Base modules) provides three slots which can be
equipped by the user with any combination of measuring or communication
modules. The software capabilities can be expanded by additional functions
(options). Additional functions must be ordered separately. They are supplied
with a device-specific TAN for function release.
Additional functions
Activation via device-
specific TAN
SmartMedia card
Data recording
ProgaLog 3000
Windows ® software for
parameter setting and
data evaluation
Documentation for the Protos 3400(X) process analysis system
• This manual describes the steps and functions required for commissioning
the module. The complete user manuals are available at www.knick.de.
• The user manual for the Protos 3400(X) describes how to install, commission,
and operate the basic unit.
• The user manual for the measuring or communication module describes all
functions required for commissioning and working with the module.
• Additional functions are supplied with a corresponding function description.
PH 3400(X)-033
3 module slots
for free combination of
measuring and communication
modules
Measuring modules
• pH / ORP / Temp
• 0 / Temp
2
• Noncontacting conductivity / Temp
• Contacting conductivity / Temp
Communication modules
• For connecting a Memosens sensor:
MS module
• Additional switching and current
outputs: OUT module
• Analog and digital controller:
PID module
• Profibus PA: COMPA module
• Foundation Fieldbus: COMFF module
• Probe controllers, Memosens sensors
and radio transmission: FIU
19