Starting The Engine - YCF 50 A 2017 Manuel De L'utilisateur

Please follow all the instructions as mentioned below when starting your Mini-Motorbike.
Operation
1. Make sure the gears are in neutral (You can check this by pushing the Mini-Motorbike forwards and
backwards. When it is in any other gear, the Mini-Motorbike will not move from its stationary
position without drive from the engine)
2. Turn the fuel tap lever to the "ON" position.
3. If the engine is cold, pull up the CHOKE to engage the lever.
4. Kick-start the Mini-Motorbike while at the same time letting off some gas.,To achieve this, use your
right foot to firmly and quickly press down on the kick-start lever. Due to the smaller,size of the
Mini-Motorbike, there is no need to apply excessive force to kick the engine over.
5. After warming up the engine for a short time, return the choke lever to its original position.
6. Never use the kick-starter on a hot day or when the engine is warm/warmed up. Just twist the
throttle grip to kick the engine over.
Caution: Be very careful not to over-use the choke, as damage to the engine and cylinder threads may occur.

STARTING THE ENGINE

98
English