YCF 50 A 2017 Manuel De L'utilisateur page 101

For safe transportation of your new motorcycle, please adhere to the following guidelines:
Please use the following checklist when arranging your Mini-Motorbike transport requirements:
1. Use an approved motorbike trailer loading ramp.
2. Ensure that the engine is not running/off and the fuel tap is closed. Always use approved
motorbike tie-down straps. Do not use any standard ropes as ropes have a tendency to loosen and
may cause the motorbike to shift or even fall out of the truck or trailer, subsequently. Leading to a
serious accident.
3. Make sure that you are using wheel chocks to secure the front wheel of your Mini-Motorbike to a
mounting surface such as a trailer or truck bed. Attach the straps to the tie down points on your
Mini-Motorbike. Using tie-downs, wrap one end around one side of the handlebar, then attach
another tie-down to the opposite side of the handlebar and front corner of the trailer.
4. Tighten the straps until the front suspension is approximately half way compressed.
5. Ensure that the tie-down strap is wrapped around the rear frame of the Mini-Motorbike. .
TRANSPORTING YOUR MOTORCYCLE
100
English