YCF 50 A 2017 Manuel De L'utilisateur page 121

Oil Level Inspection
IMAGE RIGHT SIDE
(A) Engine oil cap/Oil level dipstick
(B) Oil maximum level mark
(C) Oil minimum level mark
Oil Maintenance Procedure:
1. Position your Mini-Motorbike on a flat terrain.
2. Wipe the engine clean around the cap/dipstick (A).
3. Start and let the engine idle for a few minutes. Stop the engine. Wait a few minutes for the oil to settle.
4. Unscrew and remove the cap/dipstick, then thoroughly wipe the dipstick clean with a cloth.
5. Lift the Mini-Motorbike upright.
6. Re-insert the dipstick.
7. Then remove the dipstick and take note of where the oil level is in relation to the indicator marks. If the oil
level is getting near or has reached the maximum level mark (B), there is no need to add oil. On the
contrary, if the oil level is closer to/below the minimum level mark (C), you need to adjust the oil level as
necessary by adding oil to bring the level up to the upper mark. Beware of overfill.
8. Re-insert the dipstick fully and secure the oil cap tightly.
A
120
English
ENGINE OIL