Energy Saving Tips; Switching On The Refrigerator; Setting The Temperature - Dometic COOLMATIC CRX 50 Instructions De Montage Et De Service

Using the refrigerator
8.1

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• Allow hot food to cool down first before you put it in the refrigerator.
• Do not open the refrigerator more often than necessary. If the door is left open for
more than 5 minutes, the light starts to flash.
• Do not leave the door open for longer than necessary.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at regular intervals.
8.2

Switching on the refrigerator

➤ Switch the refrigerator on by pressing the
I
NOTE
8
After switching on, the refrigerator needs some time before the
compressor starts up.
8.3

Setting the temperature

➤ Press the button repeatedly until the desired temperature level is set.
The more LEDs light up above the button the lower is the temperature level.
To switch from the last level to the first level press the
I
NOTE
The cooling performance can be affected by:
• The ambient temperature
• The amount of food to be conserved
• The frequency with which the door is opened.
If the ambient temperature is at 16 °C to 20 °C, set the refrigerator to at
least level 2.
24
button.
button again.
CRX
EN