Energy Saving Tips; Selecting The Temperature - Dometic WAECO CoolMatic CD30 Instructions De Montage Et De Service

Operation
7 Operation
I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and care" on
page 24).
7.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Defrost your cooling device as soon as a layer of ice forms.
 Avoid unnecessarily low temperatures.
 Clean the condenser of dirt (dust etc.) at regular intervals.
7.2 Switching on the coolbox
➤ Open the coolbox drawer.
➤ To switch on the coolbox, turn the thermostat knob clockwise
(see fig. 2 2, page 3).
✓ The coolbox starts cooling the interior.
I
NOTE
Ensure that the objects placed in the coolbox are suitable for cool-
ing/warming to the selected temperature.
7.3

Selecting the temperature

The switch on the thermostat (see fig. 2 2, page 3) displays the selected
temperature.
Switch position
MAX
MIN
22
All manuals and user guides at all-guides.com
Temperature range
(independent of ambient temperature)
approx. –2 °C in interior
approx. +12 °C in interior
CD30
EN