Commissioning; Remote Operation; Maintenance - Endress+Hauser Easytemp TMR31 Instructions D'opération

Commissioning

5 Commissioning
Once the supply voltage is applied, the device is in operation.

Remote operation

The configuration of the compact thermometer is performed using the PC software
ReadWin 2000, which is available in the configuration kit as an accessory.
Interface
PC interface: TTL/USB connecting cable with plug connector.
Settable parameters
Standard settings
Advanced settings
Service functions
Detailed information about configuration using ReadWin 2000 can be found in the online
documentation of the PC software.
6

Maintenance

No maintenance work is required on the device.
28
• Measuring unit (°C/°F)
• Measuring range limits
-50 to 150 °C (-58 to 302 °F) without extension neck
-50 to 200 °C (-58 to 392 °F) with extension neck
• Fault condition reaction
• Output (analog standard/inverse)
• Filter (0 ... 8 s)
• Offset (-9.9 to +9.9 K)
• Measurement point identification/TAG
• Simulation (on/off)
TMR31, TMR35
Endress+Hauser