Taurus ROBOT 600 INOX Manuel D'utilisation page 13

Masquer les pouces Voir aussi pour ROBOT 600 INOX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Service:
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has been removed.
- Before using the product for the first time, clean the parts that will come into
contact with food in the manner described in the cleaning section.
- Prepare the appliance according to the function you wish to use.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- Select the desired speed.
- Work with the food you want to process.
Electronic speed control:
- The speed of the appliance can be regulated by using the speed regulator
control (A). This function is very useful, as it makes it possible to adapt the
power of the appliance to the type of work that needs to be done.
Once you have finished using the appliance:
- Stop the appliance by releasing the pressure on the on/off button.
- Unplug the appliance to the mains.
- Clean the appliance
Accessories:
Stick blender accessory (Fig. 1):
- This accessory is used to make sauces, soups, mayonnaise, milkshakes,
baby food...
- Attach the stick blender to the motor body by turning it in the direction indica-
ted by the arrow (Fig. 1 A).
- Pour the foodstuffs into the sieve and operate it by pressing the start button.
(Fig. 1 B)
- Detach the stick blender by turning it in the opposite direction to the arrow and
remove it for later cleaning. (Fig. 1 C)
Chopping accessory (Fig. 2):
- This accessory is used to chop vegetables or meat...
- Put the food to be prepared in the chopping container with the blades inside
and attach the cover firmly (Fig. 2 A B C).
- Fit the adapter fitting to the motor unit by turning it in the direction of the arrow
(Fig. 2 D).
- Attach the unit to the cover and switch the appliance on (be careful: do not
switch the appliance on if the whole unit is not properly fitted and connected
together (Fig. 2 E).
- Stop the appliance when the food reaches the desired texture.
- Detach the unit from the lid, and release the adapter fitting (Fig. 2 F)
Whisk accessory (Fig. 3):
- This accessory is used to whip cream, beat egg whites...
- Fit the adapter fitting (Fig. 3 A) to the motor unit by turning it in the direction of
the arrow (Fig. 3 B).
- Put the food into a large receptacle and switch the appliance on. For best
results, turn the whisk clockwise.
- Remove the whisk accessory and release the adapter fitting (Fig. 3 C)
- Note 1: Do not work at high speeds with this accessory attached, as this would
cause defects in the whisk (spinning its wires).
- Note 2: To free the whisk from the adapter fitting, pull the ring on the whisk.
Cleaning
- Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not submerge the appliance in water or any other liquid, or place it under
a running tap.
- During the cleaning process, take special care with the blades, as they are
very sharp.
- It is advisable to clean the appliance regularly and remove any food remains.
- If the appliance is not in good condition of cleanliness, its surface may degra-
de and inexorably affect the duration of the appliance's useful life and could
become unsafe to use.
The appliance is suitable for cleaning in hot soapy water or in a dishwasher
(using a soft cleaning program):
- Measuring cup
- Mincer
- Liquidiser attachment
- Whisk
Manual Robots 600.indb 13
- The draining/drying position for washable parts in dishwashers or after was-
hing by hand in a sink must allow for water to drain easily (Fig. 5).
- After washing, dry all the parts before fitting them together and storing.
Anomalies and repair
- Take the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
For EU product versions and/or in the case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included in
a collection, classification and recycling system. Should you wish to dispose of
them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be
considered harmful to the environment
This symbol means that in case you wish to dispose of the product
once its working life has ended, take it to an authorised waste
agent for the selective collection of waste electrical and electronic
equipment (WEEE)
This appliance complies with Directive 2006/95/EC on Low Voltage and Directi-
ve 2004/108/EC on Electromagnetic Compatibility.
11/02/14 08:47

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Robot 600 complet inox

Table des Matières