Maintenance - Chauvin Arnoux TK2000 Notice De Fonctionnement

6. MAINTENANCE

!
Only use the specified spare parts for maintenance.
The manufacturer cannot be held liable for any accident
occuring following repairs carried out by a third-party to
its after-sales service or approved repairers.
(A)
6.1 CHANGING THE BATTERY
! Always remove the probe before opening the thermometer.
The 9V battery can be accessed at the back of the device.
Take out screw (A) to remove the cover.
Change battery (B) (9V type 6F22).
Warning : the battery connector must be on the opposite
side to the screw.
Put the cover back and screw on.
6.2 STORAGE
If the thermometer is not used for a period exceeding 60 days,
remove the battery and store it separately.
6.3 CLEANING
Use a cloth dampened with soapy water to clean the casing.
Wipe over with a damp cloth. Dry quickly with a dry cloth or
dryer.
6.4 METROLOGICAL CHECK
!
Regular checks must be carried out as on all
measurement or test devices. For checks and calibration,
contact our COFRAC-approved metrology laboratories or
branches of MANUMESURE.
Information and contact details on request :
Tel. : 02 31 64 51 43 Fax : 02 31 64 51 09
(B)
26