Chauvin Arnoux TK2000 Notice De Fonctionnement page 25

■ The temperature ranges for each type of probe are given for
use in a chemically neutral environment.
Using these probes in a corrosive environment can
significantly reduce their life cycle or restrict the
recommended operating range depending on the case.
5.2 SUMMARY OF CHARACTERISTICS
NB : All the accessories are detailed in the "K-type Probes and
Extensions" user manual.
Their reference is given in §7 - How to order.
Reference Measuring range
Probe without handle
SK1 needle probe -50 to +800°C
SK2 bendable probe -50 to +1000°C
SK3 semi-rigid probe -50 to +1000°C
SK4 surface probe -50 to +250°C
SK5 spring surface probe -50 to +500°C
SK6 flexible probe -50 to +285°C
SK7 air probe -50 to +250°C
SK8 auto-grip probe -50 to +140°C
SK8: "velcro" ribbon for auto-grip 10mm < Ø < 90mm
PK9 retractable needle -20 to +250°C
PK9: (For automobile tyre penetration up to 15mm)
SK19 magnetic surface probe -50 to +200°C
Probes with handle and extendable spiral cord
SK11 needle probe -50 to +600°C
SK13 general purpose probe -50 to +1100°C
SK14 angle surface probe -50 to +450°C
SK15 spring surface probe -50 to +900°C
SK17 air probe -50 to +600°C
1m extensions
CK1 Amb. T° 0 to +100°C
CK2 Amb. T° 0 to +100°C
Handle
PP1 Can be adapted to CK1 and CK2 extensions.
Response time Length
1s 15cm
2s 1m
6s 50cm
1s 15cm
1s 15cm
Contact:1s, air: 3s 1m
5s 15cm
10s 32cm
5s 5.5cm
7s 1m
12s 13cm
12s 30cm
8 s 13cm
2s 13cm
3s 13cm
Male / Female 1m
Male / 2 stripped 1m
wires
25