Hedge Trimmer Safety Warnings - Grizzly AKHS 18-45 2in1 Traduction De La Notice D'utilisation Originale

GB
to the equipment. Contact between
the saw chain and a live wire can
make metal parts of the equipment
live and cause an electric shock.
• Ensure you have a secure stance dur-
ing sawing. Do not work on a ladder,
in the tree or on unstable locations.
Be very cautious carrying out work on
a slope.
• Keep your working area tidy. Only
start work if your working area is
free from obstruction and you have
planned a safe path of escape when
felling timber.
• Place the claw stop securely with
every cut and do not begin with the
sawing before this.
• Be extremely careful during sawing
small bushes and branches. The thin
branch thicket can snag in the saw
and whip in your direction or make
you unbalanced.
• Do not cut wood that is lying on the
ground.
• Pay attention to a possible spring-
back during the sawing of a branch
which is under stress, if the stress
force of the wood is suddenly re-
leased. Danger of injury exists.
• Check the safety status of the cord-
less pruner, in particular the chain
bar, chain brake and the chain, before
use.
• In the event that the cutting attach-
ment becomes jammed or stuck in
the branches, do not attempt to free
the equipment with the use of force.
Switch off the equipment immediately
and restart it only after clearing the
blockage. There is a risk of injury!
80
Hedge trimmer safety
warnings
• Children may never use the hedge
trimmer.
• Keep all parts of the body away
from the cutter blade. Do not re-
move cut material or hold material
to be cut when blades are moving.
Make sure the switch is off when
clearing jammed material. A mo-
ment of inattention while operating
the hedge trimmer may result in seri-
ous personal injury.
Carry the hedge trimmer by the
•
handle with the cutter blade
stopped. When transporting or
storing the hedge trimmer always
fit the cutting device cover. Proper
handling of the hedge trimmer will
reduce possible personal injury from
the cutter blades.
• Hold the power tool only on the
insulated handle surfaces, as the
cutting blade may come into con-
tact with concealed power cables.
Contact between the cutting blade
and a live cable may render metallic
components live and result in an elec-
tric shock.
Before the work, search the hedge
•
for concealed objects, e.g. cable
etc.
Hold the hedge trimmer correctly,
•
e.g. with both hands on the han-
dles, if there are two handles. Loss
of control of the equipment may result
in injuries.
• Wear suitable clothing and work
clothes when working with the
equipment. Do not hold the equip-
ment by the cutting blade or lift it
on the cutting blade. Contact with
the cutting blade can cause injuries.