Working With Detergents - Kärcher G 2400 HH Mode D'emploi

WORKING WITH DETERGENTS

Detergents can only be applied with the
black nozzle.
Step 1
Install the black quick-connect low pressure
nozzle for detergent application at low
pressure.
Step 2
Adjust the filter end of the detergent tube for
light (– / 0.15 gpm), or maximum (+ /
0.20 gpm) detergent coverage.
Step 3
Fill a container with Kärcher detergent. Place
the filter end of detergent suction tube into
the detergent.
8
Step 4
With the engine running, pull trigger to
operate unit. Liquid detergent is drawn into
the unit and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
For best results see Cleaning Tips on
pages 10 & 11 for specific information
on how to clean different surfaces.
Always Use Kärcher
Detergents for Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure washer.
Special formula won't clog the suction tube
filter and will protect the internal parts of
the pressure washer for a longer life. For
Kärcher Detergents, check your retailer
or call our service center for help.
The following Kärcher detergents are
available in USA / Mexico:
• All Purpose and Vehicle Wash
• Exterior House Cleaner
• Deck & Patio Cleaner
• Heavy Duty Degreaser
The following Kärcher detergents are
available in Canada:
• Vehicle Wash
• Pressure Wash
• Deck + Fence Wash
• Degreaser
Caution Never use:
• Bleach, Chlorine products and
other corrosive chemicals
• Liquids containing
(i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit
and will damage the surface being
cleaned.
solvents