Video Connection; Resolution Setting - Pioneer HTZ-BD50 Mode D'emploi

Video Connection

Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
You can hear the sound through the system's
speakers.
Video Connection
Player
VIDEO
L
AUX
R
INPUT
Yellow Yellow
TV
TV
P
R
P
B
Y
COMPONENT
VIDEO
OUTPUT

Resolution Setting

The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME MENU (
2. Use I / i/U / u to select the [Setup] and
press ENTER ( ). The [Setup] menu appears.
3. Use U / u to select [DISPLAY] option then
press i to move to the second level.
4. Use U / u to select the [Resolution] option
then press ENTER ( ) or i to move to the
third level.
5. Use U / u to select the desired resolution
then press ENTER ( ) to confi rm your
selection.
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
576p (480p) as follows:
1. Press Z to open the disc tray.
2. Press x for more than 5 seconds.
• Since several factors aff ect the resolution of
video output, see "Video Output Resolution" on
page 70.
Installation
).
23
3