Arc (Audio Return Channel) Function; Video Connection - Pioneer BCS-727 Mode D'emploi

42 Connecting
En
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
To use this function:
- Your TV must support the ARC function.
2
- The setting method of ARC may differ
depending on the TV. For details about ARC
function, refer to your TV manual.
- You must use the HDMI cable (High Speed
®
HDMI /™ Cable).
- You must connect with the HDMI IN of TV
that supports the ARC function using the
HDMI OUT on this player.
- You can connect only one Home Theater to
TV compatible with ARC.
- The ARC function does not warrant that the
function works in all cases even if the above
conditions are satisfied.
- When you use the ARC function, CEC
(Consumer Electronics Control) may work.
If you do not want to use CEC, you can stop
it work by setting [Control: Off] on HDMI. In
this case, it is needed to connect TV and this
player by an optical cable to send the audio
stream to this player.
- Power on the unit when using CEC function.
- CEC does not operate during Standby mode.

Video connection

Connect the VIDEO OUT terminal on the player
to the video in terminal on the TV using a video
cable. You can hear the sound through the
system's speakers.
Rear of the unit
Video cable
TV